![NIS](https://emhartglass.com/sites/default/files/styles/full_width_desktop_any_height/public/2020-09/NIS%20Render_1.jpg?itok=xHS3rzDe)
Ultimate servo electric forming solution
The servo electric driven NIS machine is the ultimate forming solution from Bucher Emhart Glass. The servo mechanism technology ensures that the NIS Machine outperforms traditional IS machines through better and precise motion control, perfect repeatability and faster and more precise setup time.
The use of servo electric motors reduces not only the noise level of the machine, but also significantly lowers the energy consumption.
The extended center distances of 5" TG and 95mm QG together with the conversion features DG<->TG<->QG make the NIS the most flexible high performance machine available today.
NIS | 6 1/4" Double Gob | 5" Triple Gob | 95mm Quad Gob | ||||||
---|---|---|---|---|---|---|---|---|---|
B&B | P&B | NNPB | B&B | P&B | NNPB | B&B | P&B | NNPB | |
Min. Height under Finish | 95mm | 75mm | 75mm | 95mm | 75mm | 75mm | 70mm | 70mm | 70mm |
Max. Height under Finish | 365mm | 345mm | 345mm | 365mm | 345mm | 345mm | 250mm | 250mm | 250mm |
Max. Body Diameter | 121mm | 121mm | 121mm | 90mm | 90mm | 90mm | 65mm | 65mm | 65mm |
Max Finish Diameter | 48mm | 83mm | 50mm | 48mm | 70mm | 50mm | 35mm | 50mm | 38mm |
Standard Features
- FlexIS 3 control system
- Servo Electric Gob Distributor
- Enhanced 10 lines electro pneumatic valve block (EPVB)
- Bezier delivery system
- Parallel Blank and Blow Mold
- Quick Change Plunger mechanism
- Pneumatic Control Module (Blank and Blow Side)
- FPS valve technology for Plunger Up, Counter Blow and Final Blow
- Blankside InVertiFlow mold cooling
- Integrated dead plate guide air
- VertiFlow blank mold cooling
- Neck Ring cooling
- VertiFlow blow mold cooling
- VertiFlow Assist
- High/Low deadplate cooling
- FlexIS manual mode
- Vacuum Assist Blow Side
- Blank side Barrier
Servo Electric Mechanisms
- Blank Mold Open and Close MOC (2 motors)
- Baffle Mechanism
- Invert Mechanism
- Blow Mold Open and Close MOC (2 motors)
- Blowhead
- Takeout Mechanism
- FlexPusher
Optional features
- Vacuum assist blank side
- Plunger Process Control (PPC) -enabling closed loop control)
- Temperature Control System (TCS) or BlankRadar - enabling closed loop control
- Blankside lifting device
- Variable Center Distance tong head VCD TG, QG
- Blow side lifting device
Benefits
- Servo-electric mechanisms provide precise, repeatable motion
- Allows for 5" Triple Gob production run at the same speed as Double Gob
- Allows for 95mm Quad Gob production run at the same speed as Triple Gob
- Lower, more accessible section
- Reduced compressed air usage
- Substantial noise reduction for a quieter work environment
- Improved convertibility: 6 1/4 DG - 5" TG - 95mm QG
- Three fixed plunger position heights
Downloads
TNB289 - New Standard for all BEG Forming Machines
PDF | 19.10.2020
TNB256 - VertiFlow Assist for NIS machines
PDF | 20.10.2020
TNB280 - Constant Cone Bezier Delivery
PDF | 26.10.2020
TNB240RevB - Blank Side Panel 601-416-00
PDF | 28.10.2020
TNB318 VCD Tong Head.pdf
PDF | 11.01.2024
TNB319 - NIS Neck Ring Coooling Nozzle.pdf
PDF | 17.01.2024
TNB321 - V-Baffle.pdf
PDF | 17.06.2024
TNB322 - Blow Side Lifting Device_3.pdf
PDF | 17.06.2024