|
|
|
|
|
| 1. |
Feeder |
- Adjust
feeder temperature
|
|
| 2. |
Machine
Setup and Operation |
- Insufficient
final blow time and/or pressure
- Incorrect
application of cooling wind - mold too hot
- Machine
speed is too high
- Blow
mold cycle too short
- Unsuitable
ware pusher design
- Container
not hanging in the takeout long enough
|
|
| 2. |
Machine
Setup and Operation |
- Increase
final blow time and/or pressure
- Adjust
mold cooling wind
- Adjust
machine speed
- Increase
blow mold cycle
- Improve
ware pushers design
- Reduce
time in the takeout position
- Increase
run time
|
|
| 3. |
Mold
Equipment |
- Incorrect
blow mold shape
- Incorrect
blank design
|
|
| 3. |
Mold
Equipment |
- Change
the blow mold
- Correct
blank design
|
|
| 4. |
Conveyor |
- Incorrect
cooling over the deadplate
- Pushout
moving bottle onto the conveyor too soon
- Container
rubbing against the pushout arm or guide wire
|
|
| 4. |
Conveyor |
- Adjust
cooling over the deadplate
- Delay
bottle moving onto the conveyor
- Check
movement of container on the conveyor
|
|
Note: They must
be corrected at once, as they may cause trouble on the customer's filling
line, when washing, filling or labelling
|